Reglazing the bathtub when you are planning to renovate the bathroom interior is a good idea to give the bathroom an attractive and new look.
How to Get Rid of Bathtub Reglazing Smell? You can get rid of the bathtub reglazing smell by turning on the exhaust fan, using a dehumidifier and deodorizer, and opening the windows and doors in the bathroom. This smell can be dangerous, as it contains toxic and intense fumes that can cause health problems. It is better to use a respirator mask with a cartridge and a long-handle paint roller.
The resurfacing materials used in this process may contain some chemicals with a sharp and long-lasting smell, making the bathroom air difficult to breathe.
How can you get rid of the bathtub reglazing smell?
Here are easy methods to get rid of the reglazing smell, which is very annoying. You should always follow these guidelines.
Turn on the Exhaust fan
The unpleasant smell of different products you use in the reglazing process may last for many days. It is better to get rid of this immediately because the odor can contain many toxic chemicals.
You can turn on the exhaust fan or other bathroom fans to remove them as soon as possible.
You can also use the bathroom vanity and take a shower conveniently without worrying about the sharp smell present in this place.
The exhaust fan can circulate the air, extract the odor outside, and draw fresh and breathable air inside the bathroom.
The high-power fan can do this process soon as compared to a small and low-power exhaust fan.
Therefore, it is better to continuously run the exhaust fan for 10-15 minutes and then turn it off for some time.
Use a dehumidifier
Dehumidifier is another suitable option to remove the foul odor of resurfacing materials if you have a dehumidifier in your house.
You can borrow it from a friend for one or two days if you do not have it in the house because it can cost you less than buying a new one.
The bathroom atmosphere is often humid and has a high moisture level, which causes the fumes to linger in this place, and it becomes difficult to remove the odor in a short time in a humid environment.
You can use the dehumidifier in the bathtub area and run it for 10-15 minutes after regular intervals. Turn it off after a few minutes to avoid damage to the machine and its performance.
The reglazing fumes of the refinishers can stay in the bathroom for 2-3 days after using the dehumidifier because of the wet environment.
Therefore, you can use room fresheners and deodorizers in this place to reduce the smell.
The expensive finishers have different deodorizers in their manufacturing to minimize the smell of other chemicals.
You can select any aroma to refresh the air and remove the door, as a wide range of fragrances are available in the market.
In addition, many manufacturers use deodorizers in the finishers and primers to reduce the odor, which will help reduce the smell from the coating layers of the bathtub. It is better to wait for 47 to 73 hours before using it.
Open the door and windows
Ventilation is an easy way to reduce the odor from the bathroom, as you can open all the windows and doors in this place to allow the fumes to get out and fresh air inside the bathroom.
Proper ventilation can remove the smell if you have windows that open towards the backyard where fresh air with oxygen can enter this place. In addition, you can open the emergency door towards the backyard to allow air circulation.
Make sure to use air scrubbers to prevent fumes from spreading in the house while the bathroom door and windows are open.
You can call a professional to come and inspect the place if all these methods do not help to remove the odor.
Is bathtub reglazing smell dangerous?
The reglazing process done correctly is safe, and it can last for 8 to 16 years.
However, if you do not have any expertise and experience with this process and the mixing ratio of different products.
It can cause harm to you and your family because of the intense fumes in the resurfacing materials.
The previous coating layers need to be removed before applying the new finisher or reglazing the bathtub again.
This is because they contain some toxic fumes, such as methylene chloride, which can cause health problems when do not handle carefully.
You can hire a professional to do this task if you are concerned about your health because the fumes in the smell can be dangerous.
Many epoxy coatings used in this process contain harmful chemicals.
It is better to take safety precautions or call experience workers to avoid any health problems.
Difference between refinishing and reglazing
Refinishing improves the bathtub’s look by restoring the surface and applying paints or finishers on its surface.
Still, removing the old finisher from the surface is unnecessary if it is not chipping or peeling.
Instead, you can select good finishing material that uses high-quality products and apply it with a paint roller or brush on the surface.
It is more suitable when the bathtub is in well-doing condition, and you want to refresh the look by adding some glossy appearance.
The process is less economical, as you need to choose a finisher and can do this task yourself because it does not need much hard work.
It is a challenging process, as it involves sanding the surface, filling the cracks and gaps, and applying the primer and finishers on the surface.
It is better to reglaze the fixture if the top layers are peeling and chipping off the surface and the bathtub is in worse condition.
You may need to hire a professional for this job because the process can contain safety hazards and need more experience.
However, the professionals are trained to work with different chemicals and do the job without any damage.
How can you protect yourself from the reglazing smell?
You can protect yourself from the toxic and intense smell of finishers or primers by wearing a mask to avoid inhaling fumes into the body, which can cause health issues.
In addition, a mask can protect you from inhaling the fumes from the reglazing.
A dust mask is not effective in controlling the toxic fumes into the body through respiration because the epoxy, polyurethane, and acrylic polymers contain persistent and intense odor chemicals.
Instead, you can use a respirator that has a cartridge to protect yourself from the smell.
Make sure to use long-handle brushes and paint rollers to avoid contact with finishing materials with your hands, as they can cause skin irritation, and long handles help you to keep a distance from the smell and fumes.
You can move out of the place where the odor is dispersed if the professionals are doing this process because they have proper knowledge and experience in doing such jobs and protecting themselves.
You should sleep in another room if the bathroom is attached to your bedroom.