How to Unclog a Toilet That’s Backing Up into the Bathtub?

An efficient plumbing system in a bathroom is essential for the smooth flow of fresh and sewage water in different lines. But due to blockage in the toilet, the sewerage water starts backing up in the bathtub and other things.

How to Unclog a Toilet That’s Backing Up into the Bathtub? You can unclog a toilet that’s backing up in the bathtub by using a plunger to create pressure and suction to remove the clogged substances. Clear the vent pipes with a garden hose to remove the entrapped air bubbles inside the pipeline. Use a drain snake to remove accumulated material from the drainage line. A Toilet auger is more efficient in forcing down the accumulated filth in the pipe. Copper sulfate or herbicide foam can dissolve all the debris from the sewer line.

Flushing the things in the toilet that you should not flush causes clogged drainage lines. Accumulation of hair, tree roots, paper, and other objects also blocks drainage. A blocked toilet is a serious problem and can cause discomfort for you.

Use plunger

The plunger is suitable for cleaning the drain with moderate blockage. It has different types depending upon their use. Toilet plungers are best to unclog the drains. It is also called a flange lounger. Its cup is taller than an ordinary plunger. It also has a sleeve like an extension on the bottom of the cup.

Fill the bowl of the toilet with water before using the flange. Then position the cup of the plunger in the bowl at an angle to reduce the entrapment of air inside the cup. Fix the cup inside the hole of the toilet in such a way that the flanges are inside the hole. In this way, the cup forms a complete seal around the hole.

Hold the handle and apply force on the cup to create a force of compression and suction. Then pull off the cup from the hole of the toilet. Repeat the procedure 3 to 5 times to successfully unclog the drainage. The compressional forces and suction loosen the grip of the clogged material.

Clear the vent pipes

Clogged vent pipes are also a reason for blocked toilets and bathtubs. Vent pipes are an essential part of the plumbing system to create air pressure in the pipes. They are usually present on the roof. You will need a ladder to reach the roof.

You will also need a screwdriver, plumber auger, and garden hose. Place the ladder on a leveled surface and climb up to reach the vent pipes. Then remove all the debris on the outside of the pipe. Then use a screwdriver to open it.

After this, use a plumber auger to unclog it. You can also use a garden hose to remove all the debris from inside the vent pipe. After this, close the opening of the pipe with a screwdriver.

Use drain snake

Where the plunger fails, a drain snake removes the obstructive material from the toilet. A drain snake is a retractable metal wire that has a corkscrew spring on the other end.

It is approximately 5 feet long. It goes through the drain pipe, and the corkscrew pulls out the clogged debris. A toilet snake is specially designed for the toilet and does not scratch the enamel of the bowl.

Feed the corkscrew spring to the bowl hole and force the wire through the drainage pipe. The toilet snake has a handle at the other end. Crank the handle in a clockwise direction to insert the wire in the bowl. After this, rotate it anticlockwise to pull out the debris.

You can repeat the procedure to remove the remaining clogged debris. After this, flush the toilet to check the drainage of water.

Use toilet auger

A toilet auger is like a drain snake. It is used to open the complete blockage of the drainage pipe. Like other snakes, they also have rotating handles, metal wire, and rubber sleeves at the other end to prevent scratches on the toilet bowl.

They are heavy-duty as compared to the plunger and drain snakes. A Toilet auger works by forcing and breaking the debris clog into pieces. Like a drain snake, it does not pull out the obstructive material from the drain.

Use chemicals for cleaning toilet drains

Chemical cleaning is required for severe blockage in the drain lines. Sometimes the sewer lines are blocked due to the entrapment of heavy and big objects. In such cases, chemical reagents are required to clean the line.

The deposition of minerals inside the pipes causes the formation of scales. The scales are the biggest reason for the blockage of the sewer line.

To get rid of this issue, choose any high-quality chemical cleaner. Copper sulfate is excellent for this purpose. It can dissolve all the debris and clogged substances in the drainage line.

Take a cup and pour 10 to 20 ml of copper sulfate into it. Then pour it into the toilet bowl. Then flush the toilet and let it work for one hour. Flush the toilet after an hour to see the results.

You can repeat the procedure to clean the lines. Copper sulfate is prohibited in some states due to its ability to react with other substances.

You can also use herbicide foam to dissolve all the tree roots, leaves, and fiber. The foam can dissolve all the debris within a few hours to clear the passage of water. It is also helpful in dissolving the mineral scale inside the plumbing system.

Hydro jetting

Hydro jetting is a technique to treat severe clogs in the plumbing system. You can not do it yourself in your home. You will need professional help to use this method. It is used when all other techniques fail to clear the sewer lines.

The hydro jetting machine consists of a motor, a water tank, and an interchangeable nozzle to direct a jet of water in the plumbing lines. It forces a high-pressure stream of water inside the sewer lines to break the clog and accumulate debris to clear the blockage.

The interchangeable nozzle helps n deciding the pressure of the water stream inside the pipes. The pressure varies for different parts of the sewer lines.

It is as effective as chemical cleaning in removing all the tree roots and plant leaves. It also does not cause pollution and damage the pipelines and plumbing system.

Related Articles:

Can you install a different tank on the toilet?