Many people complain that the toilet bowls are filled with water because of clogged drains which do not allow their further movement. In addition, you cannot use them because splashes can come on your clothes.
How to unclog a toilet without a plunger when the water is high? You can unclog a toilet without a plunger when water is high with a cloth hanger or metal wire, cleaning tablets or carbonated drinks, toilet brushes, dishwashing soap, and making commercial de-cloggers. Moreover, you can also use a wet vacuum, shampoo and water, vinegar and baking soda, bleach, squirt guns, plastic bottles, and caustic soda.
People use a plunger for unclogging, but it can damage the wax rings and produce scratches in the drain lines and bowl materials, so that you can try other safe methods. Moreover, these are quick and need little effort or time to unclog the toilets.
Cloth hanger and metal wire
Cloth hangers are helpful when you do not have plumger snake devices at home for unclogging your toilets. You cannot use plastic hangers because these do not help break large solid materials.
Use the metal hanger of the old coat and disassemble it from its joining end using the plier. Straighten it properly as much as possible so it can enter the drains.
You can wrap the end with a cloth so its harsh end cannot scratch the porcelain bowl material.
You can also make the loop at their end if you do not want to use the cloth. I prefer to keep the long, thick metal wire in my bathrooms.
Cleaning tablets or carbonated drinks
These are small tablets that contain a mixture of one or more chemicals. You can keep them in your bathrooms for cleaning and unclogging purpose.
The chemical composition of these tablets can also vary according to their manufacturing brand. However, these usually contain bleach, sodium hypochlorite, bicarbonate, sodium carbonate, and sodium Lauryl sulfate.
You do not have to remove the water from the bowls while adding cleaning tablets.
I used carbonated beverages to remove the clogs that come from the accumulation of minerals and other materials. Remove the water and add 5 to 6 cups of carbonated drinks to the toilet bowl. These contain phosphoric acid, which helps clear the drains.
Many people use toilet brushes to remove the clogs from their toilet when they do not have a plunger, but I avoid using them because splashes can come on you.
Bristles of the brush help in the breakdown and downward movement of the clogged particles. Avoid using metal wire brushes because these can produce cracks in porcelain material.
Use the soft bristled brushes and move them up and down to break off the blocked materials.
Dishwashing soap and shampoo
Dishwashing soap act as the slipper agent and lubricates the surface of the bowl and pipes for easy removal of tissue, large poop, and other materials causing clogging.
Use the sponge to clear the bowl to add dishwashing soap to them. Pour the dishwashing detergent and flush the toilets after this.
I used the shampoo because the dishwasher was not available at home, but it also performs as the lubricating agent for the pipes. These are cost-effective; you can purchase both things for $5 to $10.
Wet vacuum or commercial de-clogger
You can take the wet or dry vacuum machines from the markets on rent if you cannot purchase them because of their higher price tags.
A wet vacuum takes longer because it clears the water from the bowl and sucks up the clogged particles from the drains.
On average, completing the wet vacuuming process requires 10 to 15 minutes. Insert the hose directly into the drain area of the bowl and turn it on.
I made the commercial de-cloggers at home because these are less costly than those available in markets and superstores.
Mix the Epsom salt, baking soda, and dishwashing detergent in a container or bowl. Pour the solution and wait for 40 to 50 minutes, then flush the toilets to remove the mixture.
Vinegar and baking soda
It is the natural but weaker drain unclogging solution, and you cannot use it if the conditions are severe. Take the vinegar in the large cup and add 3 to 4 spoons of baking soda to the vinegar solution.
Mix it and pour it into the bowl without removing excess water from the bowl. Baking soda and vinegar mixture make a fizz reaction when you pour them.
Wait for 20 to 30 minutes and close the lid so reactive chemicals cannot move outside. Open the toilet seat lid to ensure the clearing of the bowl.
It is a quick method and only needs 10 to 15 minutes to mix both ingredients to their use.
You can use bleach in your toilets if unclogging comes from organic matter like hair and tissue paper, and you do not have a plunger. It releases the oxygen molecule during the fizz reaction, which breaks the chemical bond of the blocked materials and helps in their quick removal.
Bleach is damaging and produces scratches when you use it in concentrated form. It is better to use the diluted solution, which contains sodium hypochlorite.
Add warm water to the large container and 2 to 3 cups of bleach. Clear the bowl with a sponge to remove the extra water.
Pour the solution into the bowl and let it sit for a few minutes. You can see the bowls become clear because of the unclogging of pipe and the breakdown of organic material.
Squirt guns and plastic bottles
Squirt guns are water guns; kids usually play with them to spray water jets. Some of these have large holes with greater diameters.
These can also suck water from the puddled areas when your press their handle. Use the guns to remove the water from the bowl, and these can also suck up the small clogs.
These can suck the hair, skin particles, and other small materials that are causing blocking. You can also use plastic bottles to create the vacuum and pressure inside the drains.
Use the large bottle, open its lid, and put it in the drain area of the toilet bowl. Move the bottle up and down to create a vacuum and clear the blockages.
However, I use water-filled plastic bottles to create more pressure. Put the lid side of the bottle in the drain and then squeeze it to create pressure.
Caustic soda is a strong unclogging agent because of the presence of sodium hydroxide. Sodium hydroxide creates an exothermic reaction and generates heat when mixed with water.
The exothermic reaction releases chemicals for breaking hair, tissues, and other organic items. I do not prefer their frequent use because it is a highly reactive and toxic element for the skin.
It is necessary to handle it properly because it can cause skin burns when its splashes accidentally come on your skin.
Wear rubber gloves or goggles to prevent your eyes from the fumes generated during a chemical reaction.
Remove the water from the bowl and add the water and caustic soda mixture. You can hear the fizz sound because of a chemical reaction, and water moves down, representing the clearing of drain lines.